BuiltWithNOF
IMAC System

RYNO ENTERPRISES

Integr. Monitoring & Control System IMACS

By TOTEM - PLUS

 

imac-vessel.jpg

IMACS is an Integrated Monitoring, Alarm and Control System for engines and machinery onboard ships.

The system is :
* PLC based system – Commercial Off The Shelf hardware
* Full redundancy of CPU, BUS and work stations
* History Analysis of data and alarms (Multi sensor analysis)
* Data transfer to shore-side office

imac-photo2.jpg

SIEMENS Simatic-S7 PLC in Central Station

* Use of available COTS (Commercial Off The Shelf) hardware eliminates the dependence on dedicated, more expensive and less accessible marine spare parts; enabling easy service and/or repair anywhere in the world.
* Fault finding and maintenance are very easy due to the SIMATIC-S7 PLC Push-Pull modules that can be replaced in no time.

* Each work station can take over the entire system regardless of other stations failure (work station redundancy).
* Full redundancy of CPU and BUS – Automatic take over if one PLC fails.
* Other computers on ship’s LAN can log into the system at will (for monitoring only).

imac-photo3.jpg

Substation for I/O connections


 

 

 * Online screen monitoring of all relevant information

* Control of machinery (valves, pumps, generators etc.) from smart mimics

* Graphical representation of data with time (Trend Analysis) for all variables.

* Easy settings of alarm set points and delay times, easy calibration of sensors by software.

* Critical operations are restricted by password to authorized personnel only.

* Logging and retrieval of data for long periods of time.

* Offline analysis of data from History files (Alarm statistics and Multi Sensor Analysis) - an excellent tool for easy preventive maintenance.

* Office - Version for shore supervision provides extensive offline analysis of both data and alarms (whole month data on CD-R or just “Last Hour File” by Email).

imac-photo1.jpg

Engine Control Room with IMAC-Workstations

Redundancy:
Two Siemens S7-400 PLC units in full redundancy one PLC is the Master, the other one is the Stand -By.

Active Bus:
Replacement of I\O cards is done with a single flat-cable connector and can be changed while system is active.

imac-photo4.jpg

Schematic of Lay-Out for Installation in Gdynia

Click here for a complete PowerPoint-Presentation of the IMACS (6.1 Mb)